Ship from EU GODIAG GT107 DSG Gearbox Data Read/Write Adapter with GT105 IMMO Prog AD for DQ250, DQ200, VL381, VL300, DQ500, DL501

Product Description

GT107 DSG Gearbox Data Read/Write Adapter Plus GT105 Breakout Box 

GODIAG GT107 ECU IMMO Kit is a DSG gearbox connection adapter. DSG Gearbox maintenance engineers can clone, diagnose and repair DSG Gearbox ECU and can also read, write and adjust data for DSG Gearbox ECU via PCMFlash, PCMTuner, and Kessv2, etc.
 
Godiag GT107 DSG Gearbox adapter has automatic and manual selection for PCMFlash software. For data reading and writing, you can choose "Auto" and for diagnosis you can choose "Manual". For other software kessv2, DQ200, DQ250, DQ500 you can also choose "Manual".
 
Moreover, with the car battery power, Godiag GT107 DSG Gearbox adapter can directly read and write DSG Gearbox data and you can clearly check the communication status during the data reading and writing process.

GT107 DSG Gearbox Data Read/Write Adapter Highlights:

1. Read/write DSG Gearbox Data
2. To read and write DQ250, DQ200, VL381, VL300, DQ500, DL501 Gearbox TCU
3. Read/write DSG gearbox data with PCMTuner module 58/KESS v2/KTM bench etc
4. GT107 Has Auto and Manual selection for PCMFlash software


GT105 ECU IMMO Prog AD Features:

-A full-protocol ECU connection line for ECU programming power adjustment
-OBD2 independent PIN 4 body GND, PIN5 signal GND for special programming of some modules.
-PIN4 and PIN5 can be switched between short-circuit and non-short-circuit. 
-Standard OBD2 independent PIN4, PIN5.
-Pure copper female seat supports repeated insertion and removal, and has a long service life.
-Battery clip treated with environmentally-friendly salt spray, with a thickness of 0.5mm.
-The DC car battery cable adopts 0.75mm² 2-core sheathed cable, which supports DC5.5*2.5/ DC5.5*2.1 interface.
-The DC connector has a resettable 7A fuse.
-DC power interface, dedicated laboratory power connector.
-OBD2 universal jumper of good quality.

Godiag GT105 Gearbox Pinouts:






Connection Diagram & Operation:

1.Connect GODIAG GT107 Adapter to PCMtuner


Easy Operation:
1. Connect Godiag GT107 to the gearbox ECU DQ250, DQ200, VL381, VL300, DQ500, DL501.
2. Connect Godiag ECU IMMO Prog AD and connect 12V 2A DC power supply.
3. The GODIAG GT107 analog ignition switch is in “Auto” mode if it is not pressed, and it is in “Manual” mode if it is pressed down(Note: Please select the corresponding mode in the software for data reading)
4. Connect PCMFlash, PCMTuner J2534passthru.
5. Connect the computer to open the software and select “Auto”.

Connect GODIAG GT105 Adapter to PCMtuner



2.GODIAG GT107 Adapter Used with KESSV DQ200, DQ250, DQ500:

Easy Operation:
1. Connect Godiag GT107 to gearbox ECU DQ250, DQ200, DQ500.
2. Connect Godiag ECU IMMO Prog AD and connect vehicle battery or 12v 3A power supply.
3. Connect kessv2 device, and press down the GT107’s switch to make it in “Manual” ignition mode.
4. Connect the computer to open the software.


3.Godiag GT107 Used on the Car:

Easy Operation:
1. Connect Godiag GT107 to the gearbox ECU DQ250, DQ200, VL381, VL300, DQ500, DL501.
2. Connect the Godiag ECU IMMO Prog AD and connect the vehicle battery.
3. The Godiag GT107 analog ignition switch is in “Auto” mode if it is not pressed, and it is in “Manual” mode if it is pressed down(Note: Please select the corresponding mode in the software for data reading).
4. Connect PCMFlash, PCMTuner J2534passthru.
5. Connect the computer to open the software and select “Auto”


GT107 can be used to renew Mercedes 7G Gearbox, BMW 6HP EGS with CGDI/VVDI devices

GT107 Mercedes 7G Gearbox Pinout


GT107 BMW EGS 6HP Pinout


GT107 can also be used to diagnose/renew Benz VGS (722.8), Benz 9GT (VGS-NAG3) gearbox, GM  GPIO 4L60E, Volvo Gearbox, BMW 7-dual-clutch (GETAG 7DCT) gearbox, BMW Temic DKG, ZF 8HP gearbox with proper devices.

GT107 VGS 722.7 (A168) Pinout
3.- K line
5.- CAN High
6.- VCC 12+
7.- GND -
8.- CAN low

GT107 MERCEDES-BENZ TEMIC VGS (722.8) Pinout

Pin 1 CAN-L
Pin 2 CAN-H
Pin 3 Mass GND-
Pin 4 12V

GT107 Volvo Gearbox Pinout

GT107 Mercedes-Benz 9GT (VGS-NAG3) gearbox pinout

GT107 BMW 7-dual-clutch (GETAG 7DCT) gearbox Pinout

GT107 BMW Temic DKG Pinout

GT107 ZF8HP Gearbox Pinouts

GM  GPIO 4L60E Pinout




Package Includes:

1pc x Godiag ECU IMMO Prog AD
1pc x DSG Adapter
1pc x Power Cord with Battery Clip 
1pc x Probe

 



Return for Refund Notice:
1. We accept return for exchange within 7 days and return for refund within 30 days, buyer pays return shipping fee.
2. If you have registied the scanner but choose to return, please contact us to cancel your registry information first.

Contact us:
Email: sales@godiagshop.com
Whatsapp: +86-15827245313