Product Description
1. With Godiag GT100, can support communication detection and ECU maintenance/diagnosis /programming /coding, will make your work more simple and easier, save your time and money.
2. With Godiag BMW FEM/BDC Test Platform, can support programming new keys when all keys are lost, new keys can be added for BMW FEM BDC vehicles on the workbench.
GODIAG GT100 OBDII Protocol Detector with BMW FEM BDC Test Platform Support All Key Lost
This package including product Godiag GT100 + GODIAG Test Platform for BMW FEM/ BDC Programming, Ship from US/UK/EU warehouse Fast and NO TAX.
GODIAG GT100 OBDII Protocol Detector Universal Breakout ECU Connector
HighLights for GODIAG GT100 :
1. It is the latest testing platform for OBDII protocol
communication detection and ECU maintenance/diagnosis /programming /coding.
2. It can convert the car
OBD2 interface into 16 pin for signal detection.
3. Able to connect the single modules or multiple modules of the vehicle.
4. It can be connected with
any diagnostic tool to tell whether the car communication is good or not.
5. Can work with the most devices to do tests, will make your operation much easier, such as xhorse
vvdi2, Autel Scanner, Launch Scanner, Vident Scanner, and so on.
6. It can also
supply power to the car when you change the battery to avoid the vehicle control module data being lost,automatically locked,the key remote control fails and the fault light turns on.
7. Guarantee: One year warranty.
8. With
BMW CAS4 & CAS4+ Test Platform and
BMW FEM/BDC test platform,GT100 can work with Xhorse VVDI2/Lonsdor K518/CGDI/Autel im608 to
Support Off-site Key Programming/All Keys Lost/ Add New Key.
9. Can work Together with BMW FEM BDC Test Platform, to program FEM BDM Keys.
GODIAG GT100 Functions in Detail
- By connecting the vehicle and diagnostic tool via OBDII, Godiag GT100's LED will indicate whether the OBDII diagnostic interface has a good communication with the car
- Monitor the voltage of vehicle OBDII interface and display it in real time. If it is less than 11V, please stop the diagnosis and programming to avoid the vehicle being unable to start/data loss/module locked.
Indicator Meaning:
1. Manufacturer custom
2. SJE1850 wire
3. Manufacturer custom
4. Power grounding
5. Signal grounding
6. SAEJ2284《CAN》high
7. ISO9141-2&iso, DIS4230-4K wire
8. Manufacturer custom |
9. Manufacturer custom
10. SJE1850 wire《bus->
11. Manufacturer custom
12. Manufacturer custom
13. Manufacturer custom
14. SAEJ2284《CAN》low
15. ISO9141-2 & ISO/DIS 4230-4L wire
16. Car battery positive |
GODIAG GT100 OBD2 Breakout Box Functions:
1. OBDII Protocol Detector & communication detection
1) Connect GODIAG GT100 to the OBDII diagnostic port of the car.
2) When the device displays the voltage, turn on the power switch of GODIAG GT100.
3) Then connect to the diagnostic tool, when the tool is communicating with the car, the LED indicator of corresponding protocol will light up or flash. ( If the CAN protocol is detected, it will have the maximum brightness. When the communication is successful, the corresponding CAN-H and CAN-L will dim or twinkling weakly)
2. ECU connection: single module connection
GODIAG GT100, connected to a single ECU module, is convenient for a user to do the single-module diagnosis and programming.
1) Connect the ECU with the color jumpers. (If the ECU is CAN protocol, please check whether you will need to connect a 120 ohm resistor.)
2) The Godiag GT100 can be powered by connecting to the OBDII diagnostic interface of car, or by an AC power adapter.
3) To diagnose and program for a single ECU by connecting the diagnostic tool or ECU programmer.
3. Banana plug extension connection:
Extend the car's OBDII 16pin interface to tell you whether the OBDII interface connection is good or not, which is convenient for the test of OBDII interface voltage waveform.
4. Convert OBD1 diagnostic interface to the standard OBD2
Use the connector to convert the OBD1 interface into obd2 interface according to the diagnostic interface communication protocol.
5. Connect multiple ECU control modules at the same time, which is convenient for the professional engineers to detect and maintain.
6. Used as the extension cables: The space of the diagnostic interface location is too narrow to connect to the diagnostic tool, or the user find that the diagnostic cable is not long enough during maintenance. It can be extended by 1.2 meters.
7. Able to power the car when replacing the used battery.
1) Prepare battery A to supply power by connecting to No. 16 / 4 / 5 holes of Godiag GT100 & to the OBD2 diagnostic interface of the car.
[Notice 1. Turn on the power switch of Godiag GT100. 2. Don't turn on the ignition switch, don't start the car]
2) Then replace the brand-new battery B with the used battery in the car, which will ensure that the car has fully power to prevent data loss and audio lock-up or the malfunction due to lack of power to the ECU control module.
Hardware Connection Diagram:
Each OBD-II pin has a 4mm safety banana socket and a colored LED to indicate status display:
- Green on pins 4/5 indicates ground
- Red on pin 16 indicates power
- Blue (flashing) is for communication lines
Test leads and probes with 4mm banana plugs will connect directly into the 4mm safety sockets.
The front panel has 3 switches, a master power switch for the box and two separate 12V ouputs for powering modules through the DB25 jumper cable.
The GT100+ features a unique DB25 jumper cable which allows technicians to connect to and power up one or more modules when performing module diagnostics, programming or immobilzer work.
Use the DB25 jumper cable to connect your scan tool’s OBD-II cable to any OBD-I or manufacturer-specific diagnostic port.
Using the included AC adapter, the GODIAG can also be used as an auxiliary power supply and memory saver during battery service or replacement.
Godiag GT100 Parameter
Item |
Specification |
Diagnostic port |
OBDII |
Working voltage |
DC 9V-24V |
Work and power |
0.5-0.6W |
Adapter power |
Input AC100v-240v, Output DC12V 1A |
Operating temperature range |
-20 to 70 °C ( -4 to 158 °F ) |
Storage temperature range |
-40 to 85 °C ( -40 to 185 °F ) |
Dimension |
L: 23cm, W:18cm, H:7cm |
GODIAG FEM/BDC Test Platform For BMW
Hilights to get GODIAG FEM/BDC Test Platform:
1. Godiag FEM / BDC programming test platform is a dedicated device developed for BMW locksmiths, maintenance engineers and FEM / BDC programming engineers.
2. Can work together with original tools of
AUTEL, LAUNCH, XHORSE ,CGDI, Foxwell.
3. Can work with
GODIAG GT100,
support BMW FEM BDC Programming.
4. Godiag FEM test platform can
program new key when all keys lost, can add new key to BMW FEM BDC vehicle on bench.
5. Cheaper and Easier to use than the one on the market, can save your money!
Godiag FEM/BDC programming test platform 5 major features:
1. Provide locksmiths with the easy and convenient connection for FEM/BDC immobilizer system.
2. Perform the synchronization test for the programmed FEM / BDC and the key
3. Provide a test environment for the engineers who professionally recycle FEM/BDC.
4. Help automobile maintenance engineers check whether the FEM/BDC and the key are synchronized correctly.
5. Provide professional engineers with connecting FEM BDC modules and instrument.
Why Choose GODIAG FEM/BDC Test Platform
1. By working together with
Godiag GT100 &
xhorse vvdi 2 / bmw vvdi bim tool / Autel im608 etc, Godiag FEM / BDC test platform can program new key, can add new key and replace FEM / BDC ECU module.
2. Allowed to connect this test platform to the FEM / BDC module to test whether it can communicate or there is any malfunction.
3. Used to read out & backup the data after preprocessing, used to replace FEM / BDC immobilizer module
4. Before installing the FEM / BDC module back to the car, it can be used to test whether the programmed key synchronizes with FEM / BDC.
5. Godiag FEM / BDC test platform can help expand business for the Engineers who are skilled to program FEM / BDC key.
When a car owner lost the key, he / she can remove the FEM / BDC module and the corresponding ECU, then ship them to the locksmith to program new key, also perform a synchronization test on the programmed key and FEM / BDC.
6. Troubleshooting - when the key can't start the car, This test platform can be used to pinpoint pinpoint whether it is is caused by the mismatch between FEM / BDC and the key.
7. This test platform adopts the dedicated OEM FEM / BDC fast connector, which makes the connection simpler, more convenient and reliable. It will not bend the communication pin of FEM / BDC module.
8. GODIAG for BMW FEM / BDC Programming Test Platform Structure Description
1) DB25 female connector. (used to connect the DB25 male port of GODIAG GT100)
2) Ignition simulated start switch.
9. Dimension
Package includes:
1pc x Host
1pc xOBD 2-in-1 extension cable
1pc xColored jumper cable
1pc xPower supply 12V
1pc xResistance 120 ohm
6pcs xBanana plug
24pcs xWire accessories, Dupont 2.54mm connector female pin
1pc x BMW FEM BDC Programming Test Platform
1pc x GODIAG OBD2 to OBD25
Return for Refund Notice:1. We accept return for exchange within 7 days and return for refund within 30 days, buyer pays return shipping fee.
2. If you have registied the scanner but choose to return, please contact us to cancel your registry information first.
Contact us:Email:
sales@godiagshop.comWhatsapp: +86-15827245313