New Arrivals US/EU/UK Ship Xhorse Multi-PROG Multi Prog ECU TCU Programmer With GODIAG ECU GPT Boot AD and G-V ECU Cable For Read and write VAG Gearbox

Product Description

Xhorse Multi-PROG Multi Prog ECU TCU Programmer With GODIAG ECU GPT Boot AD and G-V ECU Cable For Read and write VAG Gearbox

Highlights:

1. Bunding Package:
    Xhorse Multi-PROG Multi Prog ECU TCU Programmer
    GODIAG ECU GPT Boot AD ECU Connector
    GODIAG G-V ECU Cable
2. GODIAG ECU GPT Adapter can help customers read and write ECU data without disassembling the ECU using the OBD2 Bench or GTP Bench method or disassembling the ECU and using the Boot method. This product is equipped with a short-circuit-proof BOOT resistance board connection line to protect the ECU. Customers can use it with J2534 devices and PCMFLash software.
4. Enabling ECU reading and writing via Bench/Boot modes.

GODIAG G-V ECU Cable

GODIAG G-V ECU Cable is used to connect  Xhorse MULTI PROG with GT107 or GT107+ GPT BENCH BOOT to read and write data on VAG gearbox ECU and engine ECU, clone ECU.
Additionally, it supports connecting the Multi-Prog with the GODIAG ECU GPT Boot AD ECU Connector, enabling ECU reading and writing via Bench/Boot modes.

Connection Diagram:

1.To read DQ200 with Xhorse Multi Prog & GT107+


2.To read DQ250 with Xhorse Multi Prog & GT107+


3.To read DQ200 with Xhorse Multi Prog & GT105+ GT107


4.To read DQ250 with Xhorse Multi Prog & GT107


5.To read ME17.8.8 with Xhorse Multi- Prog & GODIAG ECU GPT Boot AD Programming Adapter


6.To read MED17.5 with Xhorse Multi Prog & GODIAG ECU GPT Boot AD Programming Adapter


Xhorse Multi-Prog Programmer Pro-level ECU TCU Programmer

The XDMPG0GL Multi-Prog ECU Programmer is a versatile tool meticulously designed by Xhorse to access and modify crucial data stored in a vehicle's Engine Control Unit (ECU) and Transmission Control Unit (TCU). From engine maps to transmission parameters and immobilizer settings, the XDMPG0GL ECU Programmer empowers users with unprecedented control and customization.

1. Fully Replace VVDI Prog:
Multi-Prog support factory usage mode for batch programming of chips. In this mode, the functions of batch programming, offline programming, and file offline programming can be done easily. 
The main difference between VVDI PROG and Multi-Prog: Multi-Prog has the batch programming function but VVDI PROG programmer doesn't.
2. With Free MQB48 License and BMW Bench Read ISN.
Bind with Xhorse VVDI2/ Key Tool Plus PAD account, then your VVDI2/Key Tool Plus PAD can use MQB48 Function too
3. Read, Write and Clone ECU
4. Read, Write and Clone Gearbox TCU
5. Read EEPROM, ECU, MCU
6. Read and Write Bosch ECU ISN with new Bosch ecu adapter
7. Supports Checksum correction for some EDC16/EDC17 ECUs (more to come)
8. Get free BMW ISN read function and NEC, MPC, Infineon etc chip continously update service
9. With built-in free MQB48 license. Bind Multi-prog and VVDI2 (full version) or key tool plus to the same Xhorse app account to use MQB48 NEC35XX function. 
10. Free software and firmware update timely.
11. NEW! Add VAG MQB RH850 dashboard processor (Contact us to Buy Extra Xhorse XDMPR8GL MQB-RH850/V850 Adapter for Xhorse Multi Prog Pro-level Programmer)
12. Also Compatiable with Xhorse XDNPM3GL MQB48 Solder-Free Adapter 13 Full Set Adapters.
13. Can work with Xhorse Multi-Prog Exclusive Adapters (VH24+VH29+VH30+VH31 Adapters) to extend more chip reading and writing.
14. Xhorse Multi-Prog User Manual
15. Xhorse Multi-Prog Software Free Download

Other Features:

Support R&W lots of chips, include MC9S08 series, MC68HC(9)12series, MC9S12series, V850series, H8Xseries, R8Cseries, PCF79XXseries and most eeprom chips etc .
Support chip data verify, checkblank function
Support data file compare function
Free Pin code calculation service by Dump for various models
Support Read and Write BMW N20, N55 ECU (show ISN directly)
Stable Read and Write MC9S12XE series chips (5M48H/ 1N35H/ 2M53J/ 3M25J etc.)
Support renew PCF79XX remote, currently support BMW E/F series (Please Note PCF79XX adapter is optional)
Has the largest database of connection diagram
Reserve Ports: For future update
Supports Repair Porsche 12V lithium battery and BYD Lithium Battery (MC9S12XET256)
Supports EDC17/MED17 data calculation (checksum correction)
Support for third-party automatic HEX editing scripts 
Supports Expert mode: batch write chips. vvdi prog only write a single chip at a time



GODIAG ECU GPT Boot AD ECU Connector

GODIAG ECU GPT Boot AD programming adapter can help customers read and write ECU data without disassembling the ECU using the OBD2 Bench or GPT Bench method or disassembling the ECU and using the Boot method. This product is equipped with a short-circuit-proof BOOT resistance board connection line to protect the ECU. Customers can use it with J2534 devices and PCMFLash software.



Package Includes:

1pc x Multi-PROG
1pc x USB Cable
1pc x Power Adapter (15V 4A)
1pc x 220V Power Cord
1pc x VH13 Interface Adapter Board
1pc x VH20 Interface Adapter Board
1pc x VH23 Interface Adapter Board
1pc x MCU Adapter Multi-PROG Solder Cable
1pc x MCU DB15 Adapter Cable
1pc x ECU Adapter Multi-PROG Solder Cable
1pc x ECU DB15 Adapter Cable
1pc x Multi-PROG OBD Cable
1pc x USB WIFI Network Card
1pc x Product Manual
1pc x Certificate Of Conformity
43pcs x ECU Cable Plugs
1pc x GODIAG ECU GPT Boot AD Programming Adapter
 



Return for Refund Notice:
1. We accept return for exchange within 7 days and return for refund within 30 days, buyer pays return shipping fee.
2. If you have registied the scanner but choose to return, please contact us to cancel your registry information first.

Contact us:
Email: sales@godiagshop.com
Whatsapp: +86-15827245313