US/EU/UK Ship GODIAG GD101 J2534 Passthru Diagnostic Cable for Ford Mazda/ Honda/ Toyota/ Renault/ Forscan/ ScanMaster/ SDD/ ELM327/ J1979

GODIAG GD101 J2534 OBD2 Openport 2.0 Features:

GODIAG GD101 J2534 Supported Car Models:

1.JLR SDD Software for Land Rover/Jaguar
Support for L316, L319, L320, L322, L359, L538 Land Rover vehicle lines.
Support for X100, X150, X202, X250, X350, X351, X400 Jaguar vehicle lines.

2. HDS Software for Honda
Support for Accord, Civic, Crv, City, et al.

3. Toyota
Support for Camry, Rav4, Carolina, Prius, Lexus

4. ODIS VAG
Support for Vw, Audi, Seat, Skoda

5. GM GDS2 Software
Support for Buick, Chevrolet, Cadillac, etc.
 
GODIAG GD101 J2534 Protocol Configuration:

 

1. ISO15765 (Standard/Extended frame).

2. ISO9141.

3. ISO14230.

4. J1850 PWM (Support IFR and 2X speed mode).

5. J1850 VPW (Support 4X speed mode).

6. Programming voltage.

7. Short to ground.

8. ELM327 with command set version 1.3a

Notice :
Can't support MS-CAN   
 

 

1. ISO11898-2 high speed CAN (OBDII PIN 6 and PIN 14. Speed up to 1000Kbps).

2. ISO9141 and ISO14230 K line (OBDII PIN 7 and PIN 15).

3. J1850 PWM (OBDII PIN 2 and PIN 10).

4. J1850 VPW (OBDII PIN 2).

5. Programming voltage (OBDII PIN 12 or PIN 13. Programming voltage up to 20V).

6. Short to ground (OBDII PIN 9. Short to OBDII PIN5).

7. Dimension(L*W*H): 95mm*55mm*23mm

8. Environmental:-20℃-45℃(-4℉-113℉)

9. Vehicle voltage requirements: 8-18V DC

10. Vehicle connection: Molded DLC3(OBDII-16)

11. Host connection: USB 2.0

Godiag GD101 J2534 vs. VXDIAG VCX SE vs. SVCI J2534:
 

Product	Godiag J2534	VXDIAG VCX SE	SVCI J2534
Image
Software	Ford IDS/ Mazda IDS Toyota Techstream/ Honda HDS/ Forscan/ VAG ODIS/   ELMConfig, Forscan, ScanMaster/ Volvo VIDA/ GM GDS2 Renault Can Clip	Ford IDS/ Mazda IDS/ Toyota  Techstream/ JLR SDD/ Honda HDS/ Subaru SSM3/SSM4/ Benz Xentry/ Volvo VIDA/ BMW ISTA/ VAG ODIS/ Pcmflash/ Forscan/ PCMHumer	Ford IDS/ Mazda IDS/ Toyota Techstream/ JLR SDD/ ScanMaster-ELM V2.4.12/ PCMSCAN V2.1/ ELMconfig/ Forscan/ FOCCCUS/ FF2
Operating system	Windows 8/10/11, 32/64bit (Don’t work on Win7)	Windows 7/ 8/10/11, 32/64bit	Win7 64bit, Win 8, Win 10
J2534 passthru	Yes	Yes	Yes
Online Module Programming	No tested	Yes, need an online account, Ford, GM, Honda, Toyota, etc online programming tested ok	Yes, need an online account. Only Ford/Mazda online programming tested ok
License	No	Customize license	No
Firmware update	No	Update online	No
Software update	Update by Link	Update by link (except Benz and BMW thru HDD/SSD)	Update by Link
Ford trucks 12 V 1998-2006 with PWM protocol ( F series supported)	Unknown	Not working on some F series pre-2010	Yes

How to usd the GODIAG GD101 J2534?



GODIAG GD101 J2534 PCB Display:


Open the startup software, connect the device, and click upgrade firmware.

Update log:

Updated on 2023-8-16

GODIAG GD101 J2534 driver update to V2.3, Click to download V2.3
Support test Renault Clip V227
Renault year 2005+ Renault with Can Bus Protocol

Updated on 2023-03-31

1.Software update to v2.1
2.Firmware update to v1.8

Fixed the following bugs:

1. J2534 mode J1850 VPW TX message size extended to 4128 bytes
2. ELM327 mode can not be connected by PyOBD
3. ELM327 mode can not read ISO9141 VIN

Feedback:

1: For ELM327 mode, errors can also be read out without problems using ForScan.

2: With Forscan, vehicles can be read without any problems.
This adapter is ideal for simple operations such as reading and deleting fault memories.

3: The optical processing is good.
The cable is recognized by the laptop.
I then downloaded a corresponding free program from the Internet to test it, the reading of errors worked quite well with a little trial and error, for more you will probably have to use paid programs.

4: GODIAG J2534 Openport 2.0 Cable is a professional OBD2 diagnostic cable used for vehicle diagnostics and flash chip tuning.

Overall, GODIAG's J2534 Openport 2.0 Cable is a professional diagnostic and flash chip tuning tool that provides a fast and reliable connection to a wide range of vehicles and diagnostic tools. It is an excellent choice for mechanics, tuners and professionals who need a powerful and reliable diagnostic solution.

5: The special thing about this adapter is that it only has to be connected to the PC and if the COM port is set to "Auto" in the ForScan settings, it will be recognized directly and can be used. This automatic port detection is really practical and saves time because you don't have to make any settings.

6: The OBD II adapter is tight and makes reliable contact.

7: I tested it on a 2018 Ford Focus and it worked really well here.
Unfortunately, I can't speak to the overall look of older models, especially pre-2010 models.
All in all, it's a decent OBD2 cable, with impeccable quality and an affordable price that you can definitely get if you need one.

8: GODIAG J2534 V2.1 Driver Works Perfectly with ODIS V10.0 on Win10 Pro
The interface is well made and is used to connect the notebook or computer to the vehicle's OBD2 connector via USB. For me it was important to be compatible with ODIS. Installation was quick and the included QR code takes you to a website with instructions.

9: The plug works perfectly and does what it is supposed to do 100%. The data transmission speed is very fast and I can't write anything negative about this connector. The cable is long enough and due to its quality you don't have to struggle with cable breaks so quickly. All in all, the device promises longevity. Great value for money.


Package Includes:

 

1pc x GODIAG GD101 J2534