[US/EU/UK Ship] FCA 12+8 Adapter for Chrysler Universal Adapter Cable Adapter work for GODIAG GD801

Description:
Since the Fiat Chrysler Group (FCA)-related models in 2018 or later are equipped with the Security Gateway Module (SGM/SGW), this module isolates most diagnostic requests for all post-market diagnostic devices except the original one through a powerful encryption algorithm. Such as clearing fault codes, motion tests and ECU programming.
 
For FCA models in 2018 or later, non-original equipment can only be used to read fault codes, vehicle VIN identification, and view data streams through the OBD diagnostics station.
In response to this problem, the isolation of the SGM/SGW can now be bypassed by the FCA 12+8 dedicated conversion diagnostic connector.



Product Function:

OBD cluster calibration, OBD key programming, oil/service reset; also can be used with other diagnostic equpment for reading code and clearing code etc.

Connection Method:
1.Locate and unplug the 12pin and 8PIN connectors of the SGW module.
2.Then connect the FCA 12+8 directly to the 12pin and 8pin (two connectors connected to the SGW) connector on the car.
3.At this point, normal communication with the car can be achieved.

All FCA (FIAT/CHRYSLER/ALFA ROMEO) vehicles after 2018 are equipped with SGW security gateway module to prevent attacks on the vehicle network via the CAN bus. Directly plug in the OBD II-16 connector cannot communicate with the vehicles because SGW security gateway module can block the access to the vehicle's OBD2 port from non-original diagnoses. To solve this problem, you can connect to the 12PIN and 8PIN connections on the car via this FCA 12 + 8  cable to get normal communication with the car.


Vehicle Coverage:

1.CHRYSLER

2018-CHRYSLER 300
2018-CHRYSLER PACIFICA

2.DODGE

2018-DODGE CHALLENGER
2018-DODGE CHARGER
2018-DODGE DURANGO
2018-DODGE JOURNEY
2018-DODGE RAM

3.JEEP

2018-JEEP CHEROKEE
2018-JEEP GRAND CHEROKEE
2018-JEEP COMPASS
2018-JEEP WRANGLER
2018-JEEP RENEGADE

4.MASERATI

2018-MASERATI, include GHIBLI, LEVANTE,PRESIDENT

5.FIAT

2018-FIAT

How to use FCA 12+8 Cable?

Find and unplug the 12PIN and 8PIN connectors of the SGW module, and then connect the FCA 12+8 directly to the 12PIN and 8PIN (connecting to the two connectors of the SGW) connector on the car. At this time, normal communication with the car can be realized.

Application Scenarios：

2018-DODGE RAM 1500/2500/3500

2018 DODGE DURANGO

2018 GRAND CHEROKEE
2018 MASERATI GHIBLI SGW LOCATION
 
Package Includes:
1pc x FCA 12+8 Universal Adapter